Push-rod system for rail ventilation – Rail mounting configuration

Ventilation flaps arranged across a surface area (several individual or one continuous flap) can be operated by one drive unit on each side. On the rail mountings, LZG gear units are connected to the drive unit by means of a connecting shaft  (1 1/4“ tube – 2“ tube DIN EN 10255).

The racks move the pull-push rod along the rail mounting and the flap push bar are located on this rod. It is these push bar that actuate the flaps.

  • Up to 40 flaps down the length of each rail mounting, depending on flaps weight.
  • Up to 1500 Nm of drive power can be fed into the system.
  • Load ratings of up to 16000 N per rack unit, and longer strokes or higher load ratings available on request.
  • LZG gear units with various rack heights (Hzd).

Download

Rail ventilation with EWA power drive and LZG located on the rail mounting.
Rail ventilation with EWA power drive and LZG located on the rail mounting.
Lock rail mounting configuration for rail ventilation
Lock technical drawing of rail mounting configuration for rail ventilation

Push-rod system for rail ventilation – Support mounting

Ventilation flaps arranged across a surface area (several individual or one continuous flaps) can be operated by one drive unit on each side. On the rail mountings, LZG gear units are connected to the drive unit by means of a connecting shaft  (1 1/4“ tube – 2“ tube DIN EN 10255).

These racks move the pull-push rod along the length of the rail mounting to which the push bar on the flap are located. It is these push bar that actuate the flaps.

  • Up to 40 flaps down the length of each rail mounting, depending on flaps weight.
  • Up to 1500 Nm of drive power can be fed into the system.
  • Load ratings of up to 16000 N per rack unit, and longer strokes or higher load ratings available on request.
  • Available for all commonly used support dimensions and assembly kits.
  • LZG gear unit with various rack strokes (Hzd).
Lock Rail ventilation with EWA power drive and LZG mounted on support
Rail ventilation with EWA power drive and LZG mounted on support.
Lock support mounting for rail ventilation
Lock technical drawing of support mounting for rail ventilation