KKS Assembly

Lock KKS assembly technical drawing

Assembly A:

  • Rotate coupling halves ( 1 ) and ( 6 ) until teeth ( 2 ) and ( 5 ) are arranged identically. Fit retaining ring ( 3 ) to end of shaft drive.
  • Place double chain ( 4 ) around teeth on coupling halves ( 2 ) and ( 5 ) with ends of chain arranged at top.

Lock sketch for assembly KKS power drives

Assembly B:

  • Fold up end links ( 8 ) on the second chain.
  • Insert connecting link ( 7 ) through end links of the first chain.

Assembly C:

  • Insert two connecting plates ( 9 ) to connecting link.
  • Fold end links ( 8 ) back down again.
  • Insert connecting link ( 7 ) right through.

Assembly D:

  • Slide on connecting plate ( 10 ) and engage spring connection ( 11 ) in recesses in connecting link .

Maintenance: Apply light coat of lube oil to chain on an annual basis. Remove surplus oil.